BEZINI
SKL-SP2 Red Penetrant

SKL-SP2 Red Penetrant

SKL-SP2 is a visible red penetrant in a 400 ml aerosol. It enters surface-breaking cracks; after excess removal and a coat of SKD-S2 developer, each indication shows as a red line on a white background.

Request a quoteAsk for TDS / SDS

Key facts

TypeVisible (red) liquid penetrant, 400 ml aerosol
Excess removalSolvent (SKC-S on a cloth) or water wash
DeveloperSKD-S2 non-aqueous white developer
Part number0218020
Packaging400 ml aerosol, cartons of 10. Bulk 20 L and 220 L on request
ContaminantsBatch certificate of sulfur and halogen content on request, as ASME Section V (T-641) requires for nickel alloys, austenitic or duplex stainless steels and titanium
CoverageAbout 15 m of weld per can, depending on surface and procedure
Shelf life24 months from manufacture; batch number and dates on the base of every can
Label standardsAMS 2644 · ASTM E1417/E1417M · EN ISO 3452-2 (as printed on the label)

How to use it

  1. Clean and dry the area with SKC-S.
  2. Shake the can and spray an even coat over the whole area.
  3. Leave it for the dwell time in your procedure. ASME Section V (Table T-672) sets a 5-minute minimum for welds at 10–52 °C; ASTM E1417 sets 10 minutes.
  4. Remove excess penetrant: dry cloth first, then a cloth lightly moistened with SKC-S.
  5. Apply a thin, even coat of SKD-S2 developer.
  6. Interpret 10 to 60 minutes after the developer dries (ASME Section V, T-676.1), under at least 1076 lx of white light.

Do not mix penetrant materials from different families or manufacturers in one test (ASME Section V, T-654).

Follow your approved written procedure. Final sensitivity depends on surface condition, discontinuity type, dwell time, excess-penetrant removal, developer thickness, temperature, lighting and operator technique.

A penetrant test with Bezini consumables

  • Red penetrant from an SKL-SP2 can on a steel disc during dwell
    SKL-SP2 red penetrant on the surface during the dwell time.
  • Red penetrant bleeding out of slots through white developer
    SKD-S2 developer draws penetrant out of the discontinuities.
  • Cracked test block with red crack indications next to an SKL-SP2 can
    On a cracked test block, fine cracks show as red lines.
  • Inspector using a lamp during penetrant inspection of aircraft parts
    Penetrant inspection during aircraft maintenance. Photo: U.S. Navy Photo by Photographer’s Mate 2nd Class John Collins., public domain, via Wikimedia Commons.

Other products for liquid penetrant testing (PT)

Buying in Iran? SKL-SP2 is manufactured under license and sold by KimiaNDT.