BEZINI
SKD-S2 White Developer

SKD-S2 White Developer

SKD-S2 is a non-aqueous wet developer. It dries to a thin, even white coat that draws penetrant out of discontinuities, so indications from SKL-SP2 become visible.

Request a quoteAsk for TDS / SDS

Key facts

TypeNon-aqueous wet developer, white, 400 ml aerosol
Works withSKL-SP2 red penetrant
Part number0218030
Packaging400 ml aerosol, cartons of 10 (aerosol only)
Shelf life24 months from manufacture; batch number and dates on the base of every can
Label standardsAMS 2644 · ASTM E1417/E1417M · EN ISO 3452-2 (as printed on the label)

How to use it

  1. Shake the can well before and during use.
  2. Apply as soon as possible after excess penetrant removal (ASME Section V, T-675).
  3. Spray a thin, even coat: too little will not draw the penetrant out, too much can mask fine indications.
  4. Development time starts when the coat is dry; interpret 10 to 60 minutes after drying (ASME Section V, T-675.3 and T-676.1).

Follow your approved written procedure. Final sensitivity depends on surface condition, discontinuity type, dwell time, excess-penetrant removal, developer thickness, temperature, lighting and operator technique.

A penetrant test with Bezini consumables

  • Red penetrant from an SKL-SP2 can on a steel disc during dwell
    SKL-SP2 red penetrant on the surface during the dwell time.
  • Red penetrant bleeding out of slots through white developer
    SKD-S2 developer draws penetrant out of the discontinuities.
  • Cracked test block with red crack indications next to an SKL-SP2 can
    On a cracked test block, fine cracks show as red lines.
  • Inspector using a lamp during penetrant inspection of aircraft parts
    Penetrant inspection during aircraft maintenance. Photo: U.S. Navy Photo by Photographer’s Mate 2nd Class John Collins., public domain, via Wikimedia Commons.

Other products for liquid penetrant testing (PT)

Buying in Iran? SKD-S2 is manufactured under license and sold by KimiaNDT.