
SKC-S Cleaner / Remover
SKC-S is the solvent cleaner of the Bezini penetrant system. It removes oil, grease and dirt before testing, and removes excess solvent-removable penetrant before the developer goes on.
Key facts
| Type | Solvent cleaner / remover, 400 ml aerosol |
|---|---|
| Used in | PT step 1 (pre-cleaning) and step 4 (excess penetrant removal) |
| Works with | SKL-SP2 red penetrant, SKD-S2 developer, ZL-60C fluorescent penetrant |
| Part number | 0218010 |
| Packaging | 400 ml aerosol, cartons of 10. Bulk 20 L and 220 L on request |
| Shelf life | 24 months from manufacture; batch number and dates on the base of every can |
| Label standards | AMS 2644 · ASTM E1417/E1417M · EN ISO 3452-2 (as printed on the label) |
How to use it
- Spray the test area and wipe it dry. ASME Section V (T-642) asks for the surface and at least 25 mm around it to be dry and free of oil, grease, scale, paint and spatter.
- Let the solvent evaporate fully before applying penetrant.
- After the penetrant dwell time, wipe off excess penetrant with a clean, dry, lint-free cloth.
- Remove the remaining traces with a cloth lightly moistened with SKC-S.
Never spray SKC-S straight onto the surface after the penetrant: ASME Section V (T-673.3) prohibits flushing the surface with solvent before developing.
Follow your approved written procedure. Final sensitivity depends on surface condition, discontinuity type, dwell time, excess-penetrant removal, developer thickness, temperature, lighting and operator technique.
A penetrant test with Bezini consumables

SKL-SP2 red penetrant on the surface during the dwell time. 
SKD-S2 developer draws penetrant out of the discontinuities. 
On a cracked test block, fine cracks show as red lines. 
Penetrant inspection during aircraft maintenance. Photo: U.S. Navy Photo by Photographer’s Mate 2nd Class John Collins., public domain, via Wikimedia Commons.
Other products for liquid penetrant testing (PT)
Buying in Iran? SKC-S is manufactured under license and sold by KimiaNDT.
