BEZINI
Thin white contrast coat on a steel wheel hub before magnetic particle testing

WCP-2 White Contrast Paint

WCP-2 is a white contrast paint. A thin coat gives dark or uneven steel a uniform white background, so black 7HF indications stand out.

Request a quoteAsk for TDS / SDS

Key facts

TypeWhite contrast paint (background coat)
Works with7HF black magnetic ink
Part number0217030 (aerosol), 0217030-20L
Packaging400 ml aerosol, cartons of 10; 20 L and 220 L containers
Working temperature5 to 50 °C
Shelf life24 months from manufacture; batch number and dates on every pack
Used for MT toASME BPVC Section V, Article 7 · ASTM E709 · ASTM E1444/E1444M · EN ISO 9934

How to use it

  1. Clean and dry the area.
  2. Shake the can and spray a thin, even coat; let it dry.
  3. Carry out the magnetic particle test with 7HF over the white coat.

Apply only as much as gives a uniform background, and demonstrate that indications can be seen through it (ASME Section V, T-741.2). ASTM E709 (9.1.1) notes that non-conductive coatings of 0.02–0.05 mm normally do not prevent indications.

In use

  • Inspector with a yoke and an aerosol doing wet magnetic particle testing on a white-coated pipeline
    Wet magnetic particle testing on a pipeline. Photo: Davidmack at English Wikipedia, CC0, via Wikimedia Commons.
  • Black magnetic particle indication of a crack on a white contrast coat
    Black 7HF particles gather at a crack on the white coat.
  • Quality inspectors examining a welded pipe in a workshop
    Weld quality inspection in a fabrication shop. Photo: Trice Denny, public domain, via Wikimedia Commons.

Other products for magnetic particle testing (MT)

Buying in Iran? WCP-2 is manufactured under license and sold by KimiaNDT.