BEZINI
Black magnetic particle indication of a crack on a white contrast coat, circled by the inspector

7HF Black Magnetic Ink

7HF is a ready-to-use, oil-based black magnetic ink in a 400 ml aerosol for visible wet magnetic particle testing. Sprayed over WCP-2 white contrast paint while the part is magnetized, its particles gather at cracks as sharp black lines.

Request a quoteAsk for TDS / SDS

Key facts

TypeWet, visible (non-fluorescent) magnetic particles, oil vehicle, 400 ml aerosol
ParticlesBlack
Works withWCP-2 white contrast paint and an AC or DC yoke
Packaging400 ml aerosol, cartons of 10 (aerosol only)
CoverageAbout 15 m of weld per can, depending on surface and procedure
Shelf life24 months from manufacture; batch number and dates on the base of every can
Used for MT toASME BPVC Section V, Article 7 · ASTM E709 · ASTM E1444/E1444M · EN ISO 9934

How to use it

  1. Clean and dry the area, then apply a thin coat of WCP-2 and let it dry.
  2. Magnetize the area with the yoke. ASME Section V (T-772) requires at least two examinations per area, the second roughly perpendicular to the first.
  3. Shake the can and spray 7HF while the field is applied: Section V (T-773) allows the continuous method only.
  4. Inspect under at least 1076 lx of white light (ASME Section V, T-777.1).
  5. Demagnetize if residual magnetism would affect later processing or service (ASME Section V, T-778).

In use

  • Inspector with a yoke and an aerosol doing wet magnetic particle testing on a white-coated pipeline
    Wet magnetic particle testing on a pipeline. Photo: Davidmack at English Wikipedia, CC0, via Wikimedia Commons.
  • Thin white contrast coat on a steel wheel hub
    A thin WCP-2 white contrast coat comes first.
  • Quality inspectors examining a welded pipe in a workshop
    Weld quality inspection in a fabrication shop. Photo: Trice Denny, public domain, via Wikimedia Commons.

Other products for magnetic particle testing (MT)

Buying in Iran? 7HF is manufactured under license and sold by KimiaNDT.